Introduction
The ceramic coating is the most durable type of paint protection available, but it’s not something you want to rush into. The whole process can take several hours, so there are a few things that can make it go smoother and more enjoyable. Car care products Australia suggest to use the most durable type of ceramic coating for your car.
Wash and clean your car before applying the ceramic coating
You should wash and clean your car before applying the ceramic coating. This will ensure that you have a clean surface to work with and also that any waxes or polishes on the car are removed.
- Wash the car thoroughly with a good quality car shampoo, such as Purple Power. Use a soft cloth to dry off after rinsing off the shampoo from your car’s bodywork, then use another clean soft cloth to wipe down all surfaces of the bodywork so that they’re completely dry (this will prevent watermarks).
- Clean windows inside and out by using one of those glass cleaning solutions in aerosol form – keep away from tinted windows! Such solutions can also be used for other hard surfaces like headlights, indicators etc., but make sure that these areas are completely dry before applying any ceramic coating product; if not then dust particles may get trapped between layers which could lead to bubbles forming later down the line when it dries out completely… so no good there either! You might need some help getting these areas totally dried properly since they take longer than usual due to their curved shape though – so don’t worry too much about this step being done perfectly right now because we’ll come back later on after everything’s been applied properly first anyway…
Clay the car before applying ceramic coating
Clay is a method of removing contaminants from the car’s surface. Clay is used to remove surface contaminants like paint overspray, industrial fallout and even bugs. These contaminants can cause your paint to look dull and feel rough, so it’s important to get them off before you apply ceramic coating.
If you don’t have any experience claying your car, ask a professional for help or watch some YouTube videos on how to do it yourself. You’ll want to use a clay bar for this step—a clay block is great for large areas but not much good when working in tight spaces (like around door jambs). The best part about using a clay bar is that it doesn’t take long at all! Once you’ve clayed the entire body of your vehicle (and wheels), there should be no loose particles left behind that would interfere with adhesion later on down the line when applying ceramic coating overtop of them
Apply ceramic coating in a garage with no direct sunlight
Ceramic coating is a chemical process that can change the way your exterior paint looks, but it’s not something you want to apply in direct sunlight. A garage with no direct sunlight is the ideal place to apply this product, and if you have one available, use it!
The applicator pads need to be changed frequently
When applying ceramic coat, you may use one of three applicator tools: a clean cloth, a brush or an applicator pad. We recommend that you use the brush for better control. If you are using an applicator pad, then we highly recommend that you change them frequently as they will get dirty quickly.
As with most detailing products, there is always residue left over after buffing off Ceramic Coat. We recommend using a backup towel to apply pressure and remove any excess product from your vehicle’s finish before drying it by hand or with compressed air
Use a backup towel to buff off ceramic coating residue
Once the ceramic coating has been applied, it’s a good idea to buff off any residue with a clean towel. Don’t use the same towel that you used to apply the ceramic coating—this can lead to smearing and streaking. Also make sure your backup towel is not too abrasive or too soft. You want to avoid buffing away any of your hard work!
Do not aim your sprayer at the panel for too long
When you are applying Ceramic Coat, you need to make sure that you do not aim your sprayer at the panel for too long. The sprayer should be used for no more than 5-10 seconds and the angle of the nozzle should not be pointed down onto the material for more than 5-10 seconds. If this is done incorrectly, it will cause damage to both yourself and your car’s finish.
Follow these important steps to prepare your car for ceramic coating form the very first step.
It is important to follow all the instructions outlined in this article. If you skip or rush any of the steps, your car’s paint will not be properly prepared for ceramic coating and results may vary.
Conclusion
When it comes to applying ceramic coating on your car, it is important that you are aware of all the steps involved. Ceramic coatings are great for protecting your car from rust and corrosion but they can only be used if they are done properly. If you want to get more information about ceramic coatings or need any help with applying them, contact us today!